Setting Sleep Timer; Timer Operation - Icom IC-718 Instruction Manual

Hide thumbs Also See for IC-718:
Table of Contents

Advertisement

9
CLOCK AND TIMERS

Setting sleep timer

Timer operation

TIMER
POWER
117
SET
SLEEP
F-6
Main dial
F-2
F-4
EXIT/SET
TIMER
TIME
CLR
Timer indicator appears
The sleep timer turns the transceiver power OFF au-
tomatically after passing the set period. The timer can
be set to 5–120 min. in 5 min. steps.
The sleep timer function counts the 'minute' units,
and does not count the 'second' units. For exam-
ple, when the sleep timer is started at 12:00 59,
First one minute past for just 1 sec. The maximum
error is therefore 59 sec. This is normal, not a mal-
function.
q Push [EXIT/SET] several times to close multi-func-
tion screen, if necessary.
w Push [SET] (F-6) to select set mode menu screen.
e Push [TIME] (F-4) to select time set mode.
r Push [TIMER] (F-2) to select clock set mode.
t Push [SLEEP] (F-6) to select the sleep timer set
condition.
• "– – –" blinks.
y Set the desired time period using the main dial.
• "TIMER–set Push [SET]" blinks.
• Push [CLR] (F-4) to select "– – –" to cancel the setting.
u Push [SET] (F-6) to set the time.
• Push [EXIT/SET] to cancel the setting.
• The timer indicator appears.
i Push [EXIT/SET] to exit timer set screen.
o The transceiver emits 10 beeps and turns OFF
after the sleep timer period elapses.
• The timer indicator blinks while beeping.
• Push [POWER] momentarily to cancel the sleep timer,
if desired.
q Preset the daily timer as described on previously to
turn the timer function ON.
• The timer indicator appears.
w Push and hold [POWER] for 1 sec. to turn the
power OFF.
• The indicator on this switch lights red when the timer
function is ON.
e When the set time arrives, the power is automati-
cally turned ON.
r The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
• The timer indicator blinks while beeping.
• Push [POWER] momentarily to cancel the sleep timer,
if desired.
Timer action in the timer set screen must be se-
lected ON to enable timer operation, described in
page ?? steps
?.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-718 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents