Service Inspect Mode Displaying/Resetting Procedure - Kubota L5060 Operator's Manual

6. Hold down the Display mode button to highlight the
"hour" digits of the clock. Press the Display mode
button to enter a specified "hour".
Hold down the Display mode button to highlight the
"minute" digits of the clock.
Press the Display mode button to enter a specified
"minute". Hold down the Display mode button, and
the display (C) is resumed.
7. Press the Display mode button to select "Display".
Hold down the Display mode button to highlight the
"ON" indication.
Each time the Display mode button is pressed, the
"ON" and "OFF" indications are alternately switched.
With "OFF" selected, the clock display disappears
from the IntelliPanel(TM).
8. Hold down the Display mode button to get back to
the display (C).
Press the Display mode button to highlight "back"
and hold down the Display mode button to get back
to the display (B).
Press the Display mode button to highlight "back"
and hold down the Display mode button to get back
to the display (A).
BSERVICE INSPECT mode displaying/
resetting procedure
1. Press the Display mode button to select the display
(A).
2. Hold down the Display mode button to switch to the
display (B).
3. Each time the Display mode button is pressed, the
display items change one after another.
Also the hours of an item that has reached the
maintenance interval are highlighted.
OPERATING THE TRACTOR 61