Kubota L5060 Operator's Manual page 53

C Indicators that stay off:
1. If the PTO indicator(4) stays on, disengage (OFF) the
PTO.
(1) Electrical charge indicator
(2) Parking brake indicator
(3) Engine oil pressure indicator
A Daily checks with the Easy Checker(TM) only, are not
sufficient. Never fail to conduct daily checks carefully
by referring to Daily Check. (See "DAILY CHECK" in
"PERIODIC SERVICE" section.)
A Some of the Easy Checker(TM) lamps may light up
depending on the positions of the levers and switches.
A Turn on the key, and some of the indicators stay on
about 1 second.
8. Fully depress the clutch pedal.
[GST / Manual Transmission Type]
9. Turn the key to "START" position and
release when the engine starts.
(4) PTO indicator
(5) Glow plug indicator
(6) IntelliPanel(TM) display
OPERATING THE ENGINE
C IntelliPanel(TM) Message
If you try to start the engine but the following message
appears in the display, the engine fails to start. Follow the
appearing instructions and reset the display.
(1) Display
[GST / Manual Transmission Type]
Disengage PTO
Set Shuttle to Neutral
Disengage PTO
Set Shuttle to Neutral
[HST Type]
Disengage PTO
Set HST Pedal to Neutral
Disengage PTO
Set HST Pedal to Neutral
Turn the PTO clutch control
switch to "OFF" and place
the shuttle shift lever in
"NEUTRAL" position.
Turn the PTO clutch control
switch to "OFF".
Place the shuttle shift lever
in "NEUTRAL" position.
Turn the PTO clutch control
switch to "OFF" and foot off
of the speed control pedal.
Turn the PTO clutch control
switch to "OFF".
Foot off of the speed control
pedal.
31