Main Gear Shift Lever; Range Gear Shift Lever (Hi-Lo); Synchro-Shuttle Shift Lever - Kubota L5060 Operator's Manual

56 OPERATING THE TRACTOR
6. Selecting the Travel Speed.
[Manual Transmission Type]

(1) Synchro-shuttle shift lever

(2) Main gear shift lever

(3) Range gear shift lever (Hi-Lo)

BMain Gear Shift Lever
The main gear shift is fully synchronized to shift without
stopping.
A The main gear shift may be shifted between speeds
on-the-go, but the clutch must be depressed.
BRange Gear Shift Lever (Hi-Lo)
The range gear shift can only be shifted when the tractor
is completely stopped and clutch is depressed.
A To avoid transmission damage, depress the clutch
pedal and stop tractor before shifting between ranges.
(4) Front wheel drive lever
(5) Creep gear shift lever (if equipped)
(A) "FORWARD"
(B) "REVERSE"
(N) "NEUTRAL POSITION"
BSynchro-Shuttle Shift Lever
Raise up and shift the shuttle shift lever forward to obtain
forward speeds and shift back to obtain reverse speeds.
This shifting requires clutch operation.
A The synchro-shuttle shift lever may be shifted while
the tractor is moving slowly and the clutch is
depressed, but sudden gear shifting may cause
transmission damage.
A When you stand up from the seat with the shuttle lever
at "FORWARD" or "BACKWARD", the engine will stop
regardless of whether the tractor is moving or not. This
is because the tractor is equipped with Operator
Presence Control system (OPC).
"HIGH"
"LOW"