Replacing Head Lamp; Replacing Radiator Hose (Water Pipes); Replacing Fuel Hose; Replacing Intake Air Line - Kubota L5060 Operator's Manual

116 PERIODIC SERVICE
BReplacing Head Lamp
To avoid personal injury:
A Be careful not to drop the bulb, hit anything
against the lamp, apply excess force, and get
the lamp scratched. If broken, glass may cause
injury. Pay more attention to halogen lamps in
particular, which have high pressure inside.
A Before replacing the lamp, be sure to turn off
the light and wait until the bulb cools down,
otherwise, you may get burned.
C Side work light
1. While pushing the lock button, pull and remove the
electrical connector.
2. Turn the bulb counter-clockwise slightly and take out
the bulb.
3. Replace with a new bulb and reinstall the side work
light assembly in the reverse order.
C Head lamp
1. While pushing the right and left lock buttons, pull and
remove the electrical connector.
2. Remove the rubber boot.
3. Remove the clamping fixture and take out the bulb.
4. Replace with a new bulb and reinstall the head lamp
assembly in the reverse order.
(1) Electrical connector
(2) Lock buttons
(3) Rubber boot
(4) Clamping fixture
(5) Bulb (Side work light)
(6) Bulb (Head lamp)
A Be sure to use a new bulb of the specified wattage.
A Never touch the bulb surface (glass) with bare hands.
Fingerprints, for example, may break the bulb.
BReplacing Radiator Hose (Water pipes)
Consult your local KUBOTA Dealer for this service.
BReplacing Fuel Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Intake Air Line
Consult your local KUBOTA Dealer for this service.
BReplacing Power Steering Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Oil Cooler Line [HST Type]
Consult your local KUBOTA Dealer for this service.
BReplacing Oil Separator Hose
Consult your local KUBOTA Dealer for this service.