Stationary Pto; Intellipanel (Tm) Message - Kubota L5060 Operator's Manual

C Mid PTO
The mid PTO is available for KUBOTA approved
implements.
(1) Mid PTO
(2) Bolt
(3) PTO shaft cover
BStationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brakes and place blocks at the tires.
2. Make sure the shift levers are at NEUTRAL, and start
the engine.
3. Tilt the operator's seat forward.
4. Set the PTO clutch control switch to engage"ON".
(1) Seat
(2) PTO clutch control switch
5. Set the engine speed to provide recommended rear
PTO speed.
A If the PTO system is engaged and you stand up from
the seat or the seat is not tilted forward, the engine
stops automatically after standing up.
BIntelliPanel (TM) Message
1. The PTO rpm can be checked in the display.
2. When the PTO system gets engaged (ON), the
(1) Display
(2) PTO indicator
A Rear PTO "ON"
A Mid-PTO "ON"
"ON"
"OFF"
(See "INTELLIPANEL(TM)" in "OPERATING THE
TRACTOR" section.)
indicator lights up.
PTO 69