Kubota L5060 Operator's Manual page 52

30 OPERATING THE ENGINE
5. Place the hydraulic control lever in
"LOWEST" position.
(1) Draft control lever (if equipped)
(2) Position control lever
6. Set the throttle lever at the minimum
speed position.
(1) Hand throttle lever
(2) Foot throttle
[except HST Type]
(A) "DOWN"
"INCREASE"
"DECREASE"
7. Insert the key into the key switch and
turn it "ON".
"OFF" "ON"
NOTE:
ACC... All the accessories can be used while the
engine is stopped.
C Check Easy Checker(TM) Lamps
Turn the key to "ON" position and make sure the following
indicators light up or stay off.
C Indicators that light up:
1. When the key is turned "ON", indicators(1)(3) should
come on. If trouble should occur at any location while
the engine is running, the indicator corresponding to
that location comes on.
2. Suppose that the engine coolant temperature is not
high enough yet. Glow plug indicator(5) also comes on
when the key is turned "ON" to preheat the engine and
goes off automatically when preheat is completed.
Illumination time of indicator varies according to the
temperature of coolant.
3. The parking brake indicator(2) comes on while parking
brake is applied and goes off when it is released.
"START"