Kubota L5060 Operator's Manual page 38

16 INSTRUMENT PANEL AND CONTROLS
C IntelliPanel(TM) Display
No. Message
"L", "H", "M" or "N"
"F1" to "F12" or
"R1" to "R12" or
(1)
"N"
"F", "R" or "N"
(2)
(3) 0.1 to 34
(4) 0:00 to 11:59
Lower IntelliPanel(TM)
(5)
display
[HST Type]
Display the position of the range gear shift that was selected with the Range
gear shift lever.
[GST Type]
"F" is displayed when forward operation is selected with the shuttle lever.
"R" is displayed when reverse operation is selected.
Displays the number of the gear shift ratios that was selected with the main
gear shift lever.
"N" is displayed when the lever is in the neutral position.
[Manual Transmission Type]
"F" is displayed when forward operation is selected with the shuttle lever.
"R" is displayed when reverse operation is selected.
"N" is displayed when the lever is in the neutral position.
Appears when the time for an engine oil change has come.
Change the engine oil with fresh one.
Stays displayed for 3 seconds or so after the engine has got started. Buckle
up the seat belt.
Stays displayed while the cooling water temperature is too low and the glow
plug is being activated. Wait until this symbol disappears and get the engine
started.
Appears when the fuel has become less than 6 L (1.5 U.S.gals.) or so. Refuel
as soon as possible. If the fuel tank becomes empty, air will enter the fuel
system, thereby requiring a bleeding.
Displays the travel speed. (The actual speed is different from the displayed
one if the tires slip in towing or other jobs.)
Displays the clock. When (― ― : ― ―) is displayed, make the time setting.
Nothing is displayed if this is disabled.
The hour meter, trip meter, mileage, PTO rpm, HST setting, PM volume
status, time elapsed since the previous engine oil change and other data can
be displayed.
Description
Reference
page
48
52
53
56
61, 62
103
38
32
63
---
60
59