Rear Wheels - Kubota L5060 Operator's Manual

BRear Wheels
Rear tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and
left) to the desired position, and tighten the bolts.
A Always attach wheels as shown in the drawings.
A If not attached as illustrated, transmission parts may
be damaged.
A When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor 200 m (200 yards) and 10 times of shuttle
movement by 5 m (5 yards), and thereafter according
to service interval.
(See "MAINTENANCE" section.)
Models
L3560
12.4-24 Farm
L4060, L4760
14.9-24 Farm
L3560
420/70-24 IND
L4060, L4760
17.5L-24 IND
L5060, L5460, L6060
13.6-28 Farm
L5060, L5460, L6060
14.9-26 Farm
L5060, L5460, L6060
17.5L-24 IND
1200 mm 1300 mm
(47.2 in) (51.2 in.)
1285 mm
---
(50.6 in.)
1325 mm
---
(52.2 in.)
1340 mm
---
(52.8 in.)
1220 mm 1330 mm
(48.0 in.) (52.4 in.)
---
1360 mm
---
(53.5 in.)
TIRES, WHEELS AND BALLAST
(1) 215 N-m (22 kgf-m, 160 ft-lbs)
1385 mm
(54.5 in.)
1435 mm
(56.5 in.)
1360 mm
(53.5 in.)
1380 mm
(54.3 in.)
1425 mm
(56.1 in.)
1325 mm
---
(52.2 in.)
1395 mm
(54.9 in.)
83
1480 mm
(58.3 in.)
1530 mm
(60.2 in.)
1465 mm
(57.7 in.)
1490 mm
(58.7 in.)
1530 mm
(60.2 in.)
1430 mm
(56.3 in.)
1500 mm
(59.1 in.)