Kubota L5060 Operator's Manual page 142

120 TROUBLESHOOTING
Display on IntelliPanel(TM)
ERROR No. 92
Hi-Lo SOLENOID NG
ERROR No. 93
Starter RELAY NG
ERROR No. 94
OPC NG
ERROR No. 95
PTO SOLENOID NG
Trouble Item (Affected Model)
Motor for Hi-Lo shift is in trouble Contact your local KUBOTA Dealer.
Relay for engine starter motor is
in trouble
Relay for engine shut off is in
trouble
Solenoid (PTO) is in trouble
Operator's action
Using the H-DS lever, the Lo speed alone can be
selected (Hi speed not selectable).
In the HST mode, only the STALL GUARD and
MANUAL modes can be selected.
Contact your local KUBOTA Dealer.
The engine cannot start.
Contact your local KUBOTA Dealer.
The Operator Presence Control (OPC) system gets
activated, and the engine stops itself.
Contact your local KUBOTA Dealer.
The PTO shaft cannot rotate.