Checking Oil Cooler Line [Hst Type]; Checking Oil Separator Hose; Checking Antifrost Heater For Oil Separator; Checking Lift Cylinder Hose - Kubota L5060 Operator's Manual

112 PERIODIC SERVICE
BChecking Oil Cooler Line [HST Type]
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Oil cooler
(2) Oil cooler line
BChecking Oil Separator Hose
1. Check to see that all hoses and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Oil separator hoses
BChecking Antifrost Heater for Oil
Separator
(if equipped)
Consult your local KUBOTA Dealer for this service.
BChecking Lift Cylinder Hose
1. Check to see that hoses and hose clamps are tight and
not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Lift cylinder hoses
BChecking DPF Differential Pressure
Sensor Pipe
Consult your local KUBOTA Dealer for this service.
BChecking EGR Pipe
Consult your local KUBOTA Dealer for this service.

EVERY 2 YEARS

BReplacing DPF Differential Pressure
Sensor Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Boost Sensor Hose
Consult your local KUBOTA Dealer for this service.

EVERY 4 YEARS

BReplacing Radiator Hose (Water pipes)
Replace the hoses and clamps.
(See "Checking Radiator Hose and Clamp" in "EVERY 1
YEAR" in "PERIODIC SERVICE" section.)
BReplacing Fuel Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Intake Air Line
Consult your local KUBOTA Dealer for this service.