Cleaning Dpf Muffler; Every 1 Year; Checking Fuel Line; Checking Intake Air Line - Kubota L5060 Operator's Manual

110 PERIODIC SERVICE
BCleaning DPF Muffler
C Removal of ash
The longer the DPF operates, the more ash (burnt
residue) is collected in the filter. Too much ash build-up
adversely affects the DPF performance. Consult your
local KUBOTA Dealer to clean the filter.
A The DPF needs cleaning with a specific cleaning
device. Do not clean the DPF by disassembling, and
attempt by yourself, consult your local KUBOTA
Dealer.

EVERY 1 YEAR

BChecking Fuel Line
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Fuel lines
(2) Clamp bands
(1) Fuel lines
(2) Clamp bands
(3) Fuel cooler
A If the fuel line is removed, be sure to properly bleed the
fuel system.
(See "Bleeding Fuel System" in "SERVICE AS
REQUIRED" in "PERIODIC SERVICE" section.)
BChecking Intake Air Line
1. Check to see that hoses and hose clamps are tight and
not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.