Front Wheels; Rear Wheels - Kubota BX231D Operator's Manual

TYRES, WHEELS AND BALLAST
Timing to recheck After driving the tractor 200 m, after 1 day
the bolts (8 hours), and thereafter every 50 hours
NOTE :
• Use the tapered bolts for wheels with bevelled
or tapered holes.

1. Front wheels

IMPORTANT :
• Do not turn the front discs to obtain a wider
tread.
• Always attach tyres as shown in the figures in
the following table.
If you do not attach the front wheel as
illustrated in the table, transmission parts may
be damaged.
You can not adjust width of the front tread.
Tyre 18x8.50-10 Turf, 18x8.50-10 Bar, 18x8.50-10 Ind.
Tread
(A) 930 mm
How to jack up the front axle
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as shown in the following
figure.
74
(1) Frame

2. Rear wheels

IMPORTANT :
• Do not turn the rear discs to obtain wider tread.
• Always attach tyres as shown in the figures in
the following table.
If you do not attach the rear wheel as
illustrated in the table, transmission parts may
be damaged.
You can not adjust width of the rear tread.
Tyre 26x12.00-12 Turf, 26x12.00-12 Bar, 26x12.00-12 Ind.
Tread
(B) 820 mm
How to jack up rear part of the tractor
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as shown in the following
figure.
WHEEL TREAD
(2) Jack points
BX231D