Table 10 Node Device Parameters - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
T 10 N D
ABLE ODE EVICE
Parameter Description
Node name Select the node for the
service device.
POP unit name
Select the POP unit name
for the service device.
Office ID Input the office ID of the
service device server.
Module ID Input the module ID of
the service device server.
Pno Input the process number
of the service device
server.
Device name
Input the service device
name.
The maximum Input the number of the
concurrent maximum concurrent
streams
streams that can be
allowed provided by the service
device.
Device IPx
Input the IP address for
the service device.
IPx Net name
Select the IP network
type for the service
device.
Internet Input the Internet
bandwidth bandwidth for the service
(Mbps) device server.
36 Confidential and Proprietary Information of ZTE CORPORATION
P
ARAMETERS
Remark
Select the node from the drop-down list.
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
Select the POP unit from the drop-down list.
Note: The POP unit must have already be
created. Otherwise, no options in the drop-down
list.
Input the office ID of the actual application.
It must be consistent with the value set in the
/ZMSS/etc/streamingserver.xml file.
For example: 100.
Input the module ID of the actual application.
It must be consistent with the value set in the
/ZMSS/etc/streamingserver.xml file.
For example: 133.
Input the process number of the actual
application.
It must be consistent with the value set in the
/ZMSS/etc/streamingserver.xml file.
The default value is 208.
It is recommended to name the service device in
the form of "ss+IP address of the service device".
For example: ss010040110160.
Set the number according to actual capability of
the device.
It is recommended to be consistent with the value
set in the /ZMSS/etc/streamingserver.xml file
(less than 400).
For example: 100.
Address style: 000.000.000.000.
For the platform IP address, it must be consistent
with the ipaddress value in the General section
of the /home/zxin10/etc/win_mgt.ini file.
Select the network from the drop-down list.
The network type for IP1 is the default network
and not editable. The network type for IP2 and
IP3 can be selected from the pull-down list.
Note: The network types must have already be
created. Otherwise, only the default network can
be selected.
Set the bandwidth according to the capability of
the network adapter.
For example: 4000.