Table 4 Node Parameters - Zte ZXBIV IPTV Operation Manual

T 4 N P
ABLE ODE ARAMETERS
Param-
Description
eter
Node Select the node level.
level
parent
Select the parent node for
node
the new node.
name
Node Input the new node name.
name
Node Node type.
type
Maxi-
Input the maximum
mum
bandwidth for the new
node node.
band-
width
(Mbps)
Maxi- Input the maximum
mum storage space of the disk
storage array of the new node.
space
(MB)
Maxi- Input the maximum
mum
concurrent stream number.
con-
current
streams
Weekly This function is useless in
Sched- this version.
uling
Tasks
3. Set the parameters according to the descriptions in the follow-
ing table.
Note:
The parameters marked with "*" are mandatory.
Remark
Select the node level from the drop-down list.
There are three levels corresponding to the three-level
networking of IPTV system. If the level-one node is
selected as a VCDN node, it must be the central node.
And one of the central nodes can be specified as the
public central node.
Select the parent node from the drop-down list.
If the new node is a level-one node, its parent node
is null. If the new node is a level-two or level-three
node, it is required that the parent level-one or
level-two node has been added.
The device name must not contain "'".
For example: Central_node
Select a node type from the drop-down list.
Set the bandwidth value according to actual
application.
For example: 2000
Set the storage space size according to actual
application. The storage space must not exceed
2147483 M.
For example: 5000
Set the number according to the actual application.
For example: 500
-
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
17