Table of Contents
Advertisement
Parameter
Description
Device
Select the service device for
name
the channel relay.
Time shift
Select whether to support
time shift.
Channel
Input the channel cache
cache time
time according to the actual
(minute)
situation.
Start
Select whether to enable the
standby
standby function.
Support
Select whether to support
multicast url
multicast URL function.
Relay mode
Select the relay mode.
If back relay
Select whether to make relay
backup.
Physical
Select the physical source
source node
node.
Physical
Select physical POP unit.
source pop
unit
Physical
Select the physical source
source
service device.
device
Source
The transmitting mode of the
channel cast
source channel.
mode
Transmit
Select the transmitting
mode
mode.
Receive
Select the receiving mode.
mode
Multicast
Input the multicast address.
address
For unicast mode,
�
system automatically
sets TTL to 1.
For multicast mode,
�
system automatically
sets TTL to 64.
Remark
Select the POP unit from the drop-down list.
Note: The service device must have already be
created. Otherwise, no options in the drop-down
list.
Choose yes or no.
Note: The value ranges from 30 to 10080
minutes.
This function is only available for multicast mode
and when there are more than one streaming
media server in the POP unit.
This function is not available for unicast relay
mode.
Choose yes or no.
Choose UDP or TCP;
�
Choose UDP for multicast and TCP or unicast.
�
Choose yes or no.
Select the node from the drop-down list.
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
Select the POP unit from the drop-down list.
Note: The POP unit must have already be
created. Otherwise, no options in the drop-down
list.
Select the device from the drop-down list.
Note: The service device must have already be
created. Otherwise, no options in the drop-down
list.
Not editable.
Choose Unicast, Multicast or Unicast+Multi-
cast.
Only unicast can be selected.
Available address range is
�
224.0.1.0~238.255.255.255.
For multicast, the user shall set
�
ZMSSCC/LocalIP_Private parameter
(IP address of private network port) to
specify the network port for multicast
transmission.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Channel Management
81
Advertisement
Table of Contents
