Configure The Qos; Configure The Qos Global Parameters - Zte ZXHN H2640 Maintenance Management Manual

ZXHN H2640 Maintenance Management Guide(TIM)
Parameter
Connection Mode
Auto-disconnected without traffic
NAT Switch
5. Click Apply button to apply the changes.
6. On the main page of the ZXHN H2640, select Internet > Status > 3G to the 3G
Connection Status page, see
Figure 4-12 3G Connection Status
7. Click Refresh to refresh the information.

4.3 Configure the QoS

4.3.1 Configure the QoS Global Parameters

Abstract
This page provides the function of
configuration. Packets that match no classification rules will be processed according to
the default policy showed in this page.
4-16
Description
There are two connection modes:

Always On

On Demand
Setting this parameter when Connection Mode is On
Demand.
Select on/off NAT switch function.
Figure 4-12.
QoS switch and other global parameters
SJ-20200714160642-002 | 2020-07-27(R1.0)