Operator Group Management; Adding Operator Group - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
Context
Steps
104 Confidential and Proprietary Information of ZTE CORPORATION
The current operator and the operators created by the current
operator, as well as the lower level operators are listed at the
left of the page.
2. Select an operator from the operator list.
Note:
The current operator cannot assign authority to itself.
3. Select a group from the Group Options pane.
4. Click the Assign button.
Note:
If an authority is removed from the operator, all the operations
defined by this authority will be removed from the operator and
its lower level operators. If at the same time the operator has
the authority of another group, and the operation authority of
the group overlaps with the deleted group, then the authority
of this group will be removed from the operator as well.
That is to say, if an operator has the authority of these two
groups, due to authority overlapping, the operator will lose the
authority of these two groups by removing either one from the
operator.
E
ND OF STEPS
Operator Group
Management

Adding Operator Group

The operator's authority is achieved from the operator group to
which it belongs.
1. Click Purview > Operator Group.
2. Click Add.
3. Input the Group Name as shown below.