Querying Node; Figure 18 Querying Node - Zte ZXBIV IPTV Operation Manual

Each edge node distributes programs to other edge nodes
�
and each edge nodes acts as the cache of other edge nodes.

Querying Node

Steps 1. Click System Resource > Node.
2. Input the Node name.
If the node name is not specified, then all nodes will be queried.
To reset the query conditions, click the Reset button.
3. Click the query button to get the query result, as shown below.
F 18 Q
IGURE
4. Click the view link at the line of the selected node to check the
detail information, as shown below.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
N
UERYING ODE
15