Distributing Execution Command; Deleting Ip Segment - Zte ZXBIV IPTV Operation Manual

4. Click Synchronize at the Operation column of the selected
E
ND OF STEPS

Distributing Execution Command

Prerequisites If synchronizing IP segment information fails, you can synchro-
nize IP segment information again by click Distribute execution
command.
Steps 1. Click VCDN > IP Segment Task.
2. Specify the query conditions.
3. Click the query button to get the query result.
4. Click Distribute execution command to synchronize IP seg-
E
ND OF STEPS

Deleting IP Segment

Steps
1. Click VCDN > IP Segment Task.
2. Specify the query conditions such as VCDN name, Node
3. Click the query button to get the query result.
4. Click remove at the Operation column of the selected IP seg-
IP segment information.
Note:
You can select several IP segment information and perform
batch synchronization.
ment information again.
name, Start IP, End IP and Network name.
Note:
VCDN name and Node name must be specified.
If no parameter specified for a query condition option, this op-
tion will not be used as a filtering condition for the query result.
To reset the query conditions, click the Reset button.
ment information.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 VCDN Management
59