Vcdn Node Management; Querying Vcdn Nodes; Figure 55 Querying Vcdn - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
Steps
50 Confidential and Proprietary Information of ZTE CORPORATION
3. Click the query button to get the query result, as shown below.
F 55 Q
IGURE UERYING
4. Input the VCDN parameters and then click add to add a new
VCDN record to the system.
5. To delete a VCDN record, click the cancel link at the line of the
selected VCDN.
Caution:
It is required that there is no VCDN node under the VCDN to
be deleted.
E
ND OF STEPS

VCDN Node Management

The operator can assign nodes for the VCDN and specify the node
name under the VCDN. One node may be assigned to different
VCDNs.

Querying VCDN Nodes

1. Click VCDN > VCDN Node.
2. Specify the query conditions such as VCDN name, Node
name, and VCDN node name.
If no parameter specified for a query condition option, this op-
tion will not be used as a filtering condition for the query result.
To reset the query conditions, click the Reset button.
3. Click the query button to get the query result, as shown below.
VCDN