Modifying Node; Deleting Node; Synchronizing Weight; Figure 21 Modifying Node - Zte ZXBIV IPTV Operation Manual

4. Click the Confirm button to save the settings.
E
ND OF STEPS

Modifying Node

Steps
1. Click System Resource > Node.
2. Query the node to be modified.
3. Click the modify link at the line of the selected node to open
4. Modify the parameters as required.
5. Click the Confirm button to save the settings.
E
ND OF STEPS

Deleting Node

Prerequisites It is required that there is no device under the node to be deleted.
Steps 1. Click System Resource > Node.
2. Query the node to be deleted.
3. Click the remove link at the line of the selected node and then
E
ND OF STEPS

Synchronizing Weight

Steps
1. Click System Resource > Node.
the Web page shown below.
F 21 M
IGURE ODIFYING
in the pop-up confirmation box click the OK button.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
N
ODE
19