Modifying Uss Device; Figure 46 Adding Uss Device; Table 11 Uss Device Parameters - Zte ZXBIV IPTV Operation Manual

T 11 USS D
ABLE EVICE
Parameter Description
Node name Select the node
name for the USS
device.
POP unit name Select the POP
unit name.
Device name
Input the USS
device name.
Service unit Input the service
num unit number of
the USS device.
Module ID Input the module
ID of the USS
device.
Office ID Input the office
ID of the USS
device.
Pno
Input the process
number of the
USS server.
Steps
F 46 A
IGURE DDING
3. Set the parameters according to the descriptions in the follow-
ing table.
P
ARAMETERS
Remark
Select the node from the drop-down list.
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
Select the POP unit from the drop-down list.
Note: The POP unit must have already be created.
Otherwise, no options in the drop-down list.
The name should not contain "'".
Generally, this number is 1.
Input the module ID according to the actual application.
Input the office ID according to the actual application.
Input the process number according to the actual
application.
4. Click Confirm to save the settings.
E
ND OF STEPS

Modifying USS Device

1. Click System Resource > USS Device.
2. Query the USS device to be modified.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
USS D
EVICE
41