Figure 29 Adding Pop Unit (Uss Node); Table 7 Parameters Of Uss Pop Unit - Zte ZXBIV IPTV Operation Manual

Table of Contents

Advertisement

Parameter
Description
Reserved
Input the number
FTP Client
of the FTP client
concurrent
concurrent streams.
streams
Reserved
Input the number
FTP Server
of the FTP server
concurrent
concurrent streams.
streams
Reserved
Input the number
Time shift
of the time shift
concurrent
concurrent streams.
streams
TVOD time
Input the default TVOD
(Minutes)
storage time for the
edge nodes.
T
7 P
ABLE
ARAMETERS OF
Parameter
Description
Node name
Select the node name
corresponding to the
POP unit FTP.
POP unit type
POP unit type.
POP unit name
Input the POP unit
name.
USS unit ip
Input the IP address
of the USS unit.
USS unit signal
Input the IP address
ip
of the USS to
communicate with
the MDU.
Remark
It is recommended to adopt the recommended
value.
Default value: 1; recommended value: 0.
It is recommended to adopt the recommended
value.
Default value: 1; recommended value: 0.
This parameter should be determined according to
the channel number. Half of the channel number is
recommended.
By default, it is 30 minutes. The available range
is 30 ~ 20160 minutes.
If it is a USS node, the Web page shown below appears.
F
29 A
IGURE
DDING
The USS POP unit parameters are described in the following
table.
USS POP U
NIT
Remark
Select the node from the drop-down list.
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
USS POP unit
The name should not contain "'".
For example: unit058223240057
IP address style: 000.000.000.000
For example: 010.040.035.0125
IP address style: 000.000.000.000
For example: 010.040.035.0125
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
POP U
(USS N
NIT
ODE
)
25

Advertisement

Table of Contents
loading

Table of Contents