Modifying Epg Device; Table 12 Epg Device Parameters - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
T 12 EPG D
ABLE EVICE
Parameter Description
EPG device Input the EPG
name device name.
Device type Select the EPG
device type.
EPG device IP Input the IP
address of the
EPG device.
Port Input the port
No. of the EPG
server.
Module ID Input the module
ID of the EPG
server.
Office ID Input the office
ID of the EPG
server.
Pno
Input the process
number of the
EPG server.
Adscript cp Select the CP to
name which the EPG
server belongs.
Steps
44 Confidential and Proprietary Information of ZTE CORPORATION
P
ARAMETERS
Remark
The name should not contain "'".
Select IPTV or advertisement.
Input the EPG IP address of the actual application.
For example: 10.40.35.215.
Input the EPG port No. of the actual application.
For example: 8082.
Set the parameters according to the actual application
and it must be consistent with the value set in the
/home/zxin10/was/tomcat/webapps/iptvepg/WEB-
INF/classes/com/zte/EPGConfig.properties file.
For example: 133.
Set the parameters according to the actual application
and it must be consistent with the value set in the
/home/zxin10/was/tomcat/webapps/iptvepg/WEB-
INF/classes/com/zte/EPGConfig.properties file.
For example: 100.
Set the parameters according to the actual application
and it must be consistent with the value set in the
/home/zxin10/was/tomcat/webapps/iptvepg/WEB-
INF/classes/com/zte/EPGConfig.properties file.
The default value is 228.
Select the CP from the drop-down list.
Note: The CP must have already be created. Otherwise,
no options in the drop-down list.
4. Click Confirm to save the settings.
E
ND OF STEPS

Modifying EPG Device

1. Click System Resource > EPG Device.
2. Query the EPG device to be modified.
3. Click the modify link at the line of the selected EPG device to
open the Web page shown below.