Deleting Epg Device; Querying Node Performance; Figure 51 Modifying Epg Device - Zte ZXBIV IPTV Operation Manual

F 51 M
IGURE
4. Modify the USS device parameters as required.
Device type and EPG device IP are not editable.
5. Click Confirm to save the settings.
E
ND OF STEPS

Deleting EPG Device

Steps 1. Click System Resource > EPG Device.
2. Query the EPG device to be deleted.
3. Click the remove link at the line of the selected EPG device
and then in the pop-up confirmation box click the OK button.
E
ND OF STEPS

Querying Node Performance

Steps 1. Click System Resource > Node Performance Query.
2. Specify the query conditions such as Node name and Control
program status.
If no parameter specified for a query condition option, this op-
tion will not be used as a filtering condition for the query result.
To reset the query conditions, click the Reset button.
3. Click the query button to get the query result, as shown below.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
EPG D
ODIFYING EVICE
45