Zte ZXBIV IPTV Operation Manual page 86

ZXBIV IPTV MDP Operation Manual
Parame- Description
ter
RTP Input the port
stream No. of the RTP
port X stream. There are
two categories of
RTP stream, audio
stream and video
stream.
Start Select whether to
standby enable the standby
function.
Support If the function is
multicast enabled, STB does
url not apply channel
information from
the Agent. It joins
the multicast group
according to the
configuration.
Multicast Input the multicast
url IP address and port
No.
File name This program will be
of the played if the current
default live broadcasting
program program is
interrupted.
SDP file Select the SDP file
name name
for the
access
to the
channel
via
unicast
SDP file Select the SDP file
name name
for the
access
to the
channel
via
multicast
Connect
Select the
Mode
connection mode.
76 Confidential and Proprietary Information of ZTE CORPORATION
Remark
The port No. should be an even number greater than 7980.
This function is only available for multicast mode and when
there are more than one streaming media server in the POP
unit
.
Choose yes or no.
The parameter is valid only when multicast URL function is
enabled. The format is IP address: port No..
If the VCDN name, node name, POP unit name and device
name are specified, this file can be selected from the
drop-down list.
If the VCDN name, node name, POP unit name and device
name are specified, this file can be selected from the
pull-down list.
If the VCDN name, node name, POP unit name and device
name are specified, this file can be selected from the
drop-down list.
Users can choose:
Local file/normal relay
�
SDP content
�
Multicast URL
�
MVS SDP content
�
MVS RTSP-URL
�
Note: MVS SDP content and MVS RTSP-URL are only
available when the channel type is selected as Live MVS.