Node Dependence Management; Querying Node Dependence; Editing Node Dependence; Figure 60 Querying Node Dependence - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
Steps
Prerequisites
Steps
54 Confidential and Proprietary Information of ZTE CORPORATION
Node Dependence
Management
When the current service node of the user cannot satisfy the ser-
vice request, the system forwards the request to the dependent
node. Thus, the request of the user is satisfied.

Querying Node Dependence

1. Click VCDN > Node Associate.
2. Specify the query conditions such as VCDN name, Service
type and Node name.
If no parameter specified for a query condition option, this op-
tion will not be used as a filtering condition for the query result.
To reset the query conditions, click the Reset button.
3. Click the query button to get the query result, as shown below.
F 60 Q
IGURE UERYING
E
ND OF STEPS

Editing Node Dependence

It is required that the VCDN has been created and there are at
least two VCDN nodes created.
1. Click VCDN > Node Associate.
2. Click Edit to open the Web page shown below.
F 61 E
IGURE DITING
N D
ODE EPENDENCE
N D -1
ODE EPENDENCE