Modifying Network Type Identifier; Deleting Network Type Identifier; Network Ip Segment Management; Figure 5 Modifying Network Type Identifier - Zte ZXBIV IPTV Operation Manual

Modifying Network Type Identifier

Prerequisites It is required that the network type is non-platform.
Steps 1. Click System Resource > Net Type.
2. Query the network type identifier to be modified.
3. Click the modify link at the line of the selected network to
4. Modify the network type parameters such as Network ID,
5. Click Confirm to save the settings.
E
ND OF STEPS

Deleting Network Type Identifier

Prerequisites It is required that the network is not in use and is not a platform
network.
Steps 1. Click System Resource > Net Type.
2. Query the network type identifier to be deleted.
3. Click the remove link at the line of the selected network and
E
ND OF STEPS
Network IP Segment
Management
Network IP segment management is used to configure the start
and end IP address for the selected network.
open the Web page shown below.
F 5 M N
IGURE ODIFYING
Network Name and Network description.
The Network Type is not editable.
then in the pop-up confirmation box click the OK button.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Resource Management
T I
ETWORK YPE DENTIFIER
7