Table of Contents
Advertisement
ZXBIV IPTV MDP Operation Manual
T
13 VCDN N
ABLE
ODE
Parame-
Description
ter
VCDN
Select the VCDN name
name
for the VCDN node.
Node
Select the node name for
name
the VCDN node.
VCDN
The name of the VCDN
node
node.
name
The
Specify the live
number
broadcasting channels
of created
that can be created on
channels
this VCDN node.
allowed
Reserved
Input the disk space
space
size of this VCDN node
(MB)
reserved for the service
provider.
Reserved
Input the bandwidth
bandwidth
reserved for the current
(Mbps)
VCDN by this VCDN node.
Set to
Whether to set this VCDN
recording
node as the recording
node
node.
Set as the
Whether to set this VCDN
central
node as the central node.
node
if public
Whether to set this VCDN
central
node as the public central
node.
node
52
Confidential and Proprietary Information of ZTE CORPORATION
4. Select the VCDN name and Node name and then click the
add button to open the Web page shown below.
F
58 A
IGURE
DDING
5. Set the parameters according to the descriptions in the follow-
ing table.
P
ARAMETERS
Remark
Select the VCDN from the drop-down list.
Note: The VCDN must have already be created.
Otherwise, no options in the drop-down list.
Select the node from the drop-down list.
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
Set the VCDN node name according to the
requirement.
For example, VCDN node 1-Jiangsu Telecom.
Set the number according to the actual application.
Available range: 1~999999.
For example: 250.
Set the disk space size according to actual application.
Where, the maximum size is the disk space size that
has not been allocated to other VCDNs.
Set the bandwidth according to actual application.
Where, the maximum bandwidth is the bandwidth
that has not been allocated to other VCDNs.
Select yes or no according to actual situation. If
there has been a set recording node already, then the
recording node set later will replace the previous one.
If the selected node is level 1 node, then this node
must be the central node, while if the selected node is
non-level 1 node, then this node must be non-central
node.
If this node is central node, select yes or no according
to the actual situation.
VCDN N
ODE
Advertisement
Table of Contents
