Figure 86 Adding Relay (Batch Uss); Table 17 Parameters Of Single Source Single Point Relay - Zte ZXBIV IPTV Operation Manual

ZXBIV IPTV MDP Operation Manual
T 17 P
ABLE ARAMETERS OF
Parameter
Description
Channel Channel name.
name
Channel ID Channel ID.
VCDN name
The VCDN name of the
channel.
Logistic Logic source node.
source node
Logistic Logic source POP unit.
source
popunit
Logistic Logic source service device.
source
device
Channel Channel type.
type
Coding type Coding type.
Node name Select the node for the
channel relay.
POP unit Select the POP unit for the
name channel relay.
80 Confidential and Proprietary Information of ZTE CORPORATION
F 86 A
IGURE DDING
5. Set the parameters according to the descriptions
and Table 18. The parameters of single source single point
relay and that of the batch POP relay are similar.
S S S
INGLE OURCE INGLE
R (B USS)
ELAY ATCH
P R
OINT ELAY
Remark
Not editable.
Not editable.
Not editable.
Not editable.
Not editable.
Not editable.
Not editable.
Not editable.
Select the node from the drop-down list.
Note: The VCDN node must have already be
created. Otherwise, no options in the drop-down
list.
Select the POP unit from the drop-down list.
Note: The POP unit must have already be
created. Otherwise, no options in the pull-down
list.
ofTable 17