Figure 62 Editing Node Dependence-2; Table 14 Node Dependence Parameters - Zte ZXBIV IPTV Operation Manual

T 14 N D
ABLE ODE EPENDENCE
Parameter Description
VCDN name Select the VCDN name.
Service type
Select the service type.
Node name Select the node to create
dependent node for it.
The first PRI Select whether the node
dependence accords
with the first priority
configuration.
The second Select whether the node
PRI dependence accords
with the second priority
configuration.
The Third Select whether the node
PRI dependence accords
with the third priority
configuration.
3. Set the parameters according to the descriptions in the follow-
ing table.
P
ARAMETERS
Remark
Select the VCDN from the drop-down list.
Note: The VCDN must have already be created.
Otherwise, no options in the drop-down list.
Select the service from the drop-down list: VOD,
TVOD, Channel and Time-shift.
Select the node from the drop-down list.
Note: The VCDN node must have already be
created. Otherwise, no options in the drop-down
list.
Choose yes or no.
Choose yes or no.
Set the parameter according to the requirement.
By default, no dependence priority is selected. If yes is se-
lected, the Web page shown below appears.
F 62 E
IGURE DITING
i. Select a node from the No depended list.
ii. Set the priority value in the Priority pane: 0 ~ 10 (0 stands
for the highest priority).
iii. Click Add in the Operation pane to add the selected node
to the Depended list.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 VCDN Management
N D -2
ODE EPENDENCE
55