Wsw28 (Function Setting 6) - Ricoh HL-F1 Field Service Manual

2 Ringer OFF setting
3 Not used.
4 Detection of distinctive ringing pattern
5 to 7 Not used.
8 Not used.
• Selectors 4 and 5 are applicable to the U.S.A. models only.
• Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
• Selectors 4: Detection of distinctive ringing pattern
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0," the machine
detects the number of rings and the ringing time length to compare the detected ringing pattern with
the registered distinctive one.

WSW28 (Function setting 6)

Selector No.
Transmission level of DTMF high-band
1 to 3
frequency signal
Function
Firmware Switches (WSW)
0: Yes 1: No
-
0: Yes 1: No
-
-
Setting and Specifications
No. 1 2 3
0 0 0 : 0 dB
0 0 1 : +1 dB
0 1 0 : +2 dB
0 1 1 : +3 dB
1 0 0 : 0 dB
1 0 1 : -1 dB
1 1 0 : -2 dB
1 1 1 : -3 dB
5
189