Ricoh HL-F1 Field Service Manual page 123

• (1) Double-click the brmainte.EXE file (maintenance utility) stored in the PC.
• (2) Select Input Information [A] from Menu. Select the applicable model name.
• (3) Check the port (USB) [B] which the machine is connected through and click "Serial No." [B].
• (4) Enter the serial number [C] (the last nine digits) of the machine and click the OK button. (Refer
to the NOTE below for the serial number label [A].)
• (5) The serial number is shown in the window, and check if it is correct. The setting of the serial
number is completed.
• Please refer to the illustration above for the identification and the location of the serial number
label [A]. (Serial number [B]: last nine digits)
10. Inputting the adjusted value of the laser scanner
Requirement Adjustment after Parts Replacement
4
121