Fine Adjustment Of Scan Start/End Positions (Function Code 54) - Ricoh HL-F1 Field Service Manual

5. Service Maintenance
End page sample
5
1. Job number
2. Total number of pages to be transferred
3. Station ID registered in the sender equipment
4. Fax number of the sender equipment
5. Telephone number of the sender equipment
6. Error codes

Fine Adjustment of Scan Start/End Positions (Function code 54)

Function
This function is to adjust the scan start/end positions.
Operating Procedure
1. Press the "5" and "4" keys in this order in the initial stage of the maintenance mode.
The "SCAN START ADJ." will appear on the LCD.
142