Wsw03 (Pabx* Mode Setting) - Ricoh HL-F1 Field Service Manual

5. Service Maintenance
3
4
5 to 8
• Selectors 1 through 4: Tone signal transmission time length and Min. pause in tone dialing
5
These selectors set the tone signal transmission time length [A] and minimum pause [B] in tone dialing.
(Example: If "1," "2," "3," "4," and "5" are dialed.)
• Selectors 5 through 8: Attenuator for pseudo ring backtone to the line
These selectors are used to adjust the sound volume of a ring backtone in the F/T mode, an on-hold
sound, or a beep generated as a signal during remote control operation or at the start of ICM
recording.
The larger the value specified by these selectors, the greater the attenuation.

WSW03 (PABX* mode setting)

Selector No.
1
2 to 4
164
Min. pause in tone dialing
Attenuator for pseudo ring backtone to the
line (selectable in the range of 0-15 dB, in
1 dB increments)
Function
CNG detection when sharing a modular
wall socket with a telephone
Not used.
No. 3 4
0 0 : 70 ms
0 1 : 80 ms
1 0 : 90 ms
1 1 : 140 ms
No 5 = 0 : 0 dB, 1: 8 dB
No 6 =0 : 0 dB, 1: 4 dB
No 7 =0 : 0 dB, 1: 2 dB
No 8 =0 : 0 dB, 1: 1 dB
Setting and Specifications
0: A 1: B
-