Ricoh HL-F1 Field Service Manual page 295

Code 1 Code 2
B0
B0
B0
BF
BF
BF
* Establishment of FAX communication:
FAX communication is established when the calling station receives a DIS (reception capability) signal
from the called station and the called station receives an NSS or DCS (communications test) signal
from the calling station.
12. Maintenance mode
Code 1 Code 2
E0 01
E0 02
13. Equipment error
Code 1 Code 2
FF X X
02 Unable to receive the next-page data.
Unable to receive polling even during turn-around transmission due
03
to call reservation.
04 PC interface error.
Communication canceled by pressing the Stop/Exit before
01
establishment of FAX communication*
Communication canceled by pressing the Stop/Exit after
02
establishment of FAX communication*.
Transmission canceled due to a scanning error caused by no
03 document or document feed problem in ADF scanning in real time
transmission.
Causes
Failed to detect 1300 Hz signal in burn-in operation.
Failed to detect PB signals in burn-in operation.
Causes
Equipment error (For X X, refer to "Error codes shown in the "MACHINE
ERROR X X" message" section.)
Causes
Error Indication
2
39