Wsw17 (Function Setting 2) - Ricoh HL-F1 Field Service Manual

5. Service Maintenance
• Selector 7 is applicable to models equipped with ADF units.
• Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT) recommended superfine mode
(15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
• Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
• Selector 8: "Stop" key pressed during reception
If this selector is set to "1," pressing the "Stop/Exit" key can stop the current receiving operation. The
received data will be lost.

WSW17 (Function setting 2)

5
Selector No.
1
2
3
4
5
6
7
8
• Selectors 1 and 2: Off-hook alarm
These selectors activate or deactivate the alarm function which sounds an alarm when the
communication is completed with the handset being off the hook.
• Selector 5: Calendar clock type
If this selector is set to "0" (USA), the MM/DD/YY hh:mm format applies; if it is set to "1" (Europe),
the DD/MM/YY hh:mm format applies: DD is the day, MM is the month, YY is the last two digits of
the year, hh is the hour, and mm is the minute.
180
Function
Off-hook alarm
Not used.
Calendar clock type
Not used.
Non-ring reception
Not used.
Setting and Specifications
No. 1 2
0 0 : No alarm
0 1 : Always valid
1 X : Valid except when 'call
reservation' is selected.
-
0: U.S.A. type 1: European type
-
0: OFF 1: ON
-