Dsa Tape Drive Test Results - Lenovo NeXtScale nx360 M4 Installation And Service Manual

User Response
Perform the actions mentioned one at a time and try the test after each action:
1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the latest level.
3. Run the test again.
4. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM

DSA tape drive test results

The following messages can result when you run the tape drive test.
Test results for the DSA tape drive test
The following messages can result when you run the DSA tape drive test.
• 264-000-000 : Tape Test Passed
Tape Test Passed.
Recoverable
No
Severity
Event
Serviceable
No
Automatically notify support
No
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 264-901-000 : Tape Test Failed
An error was found in the tape alert log.
Recoverable
No
Severity
700
IBM NeXtScale nx360 M4 Installation and Service Guide