Lenovo NeXtScale nx360 M4 Installation And Service Manual page 161

2.5-inch Hard disk
drive cage
2
Figure 70. Lift the 2.5-inch hard disk drive cage upward
Step 6. Remove the filler panel, if one is present.
Step 7. Touch the static-protective package that contains the disk drive to any unpainted metal surface
on the server; then, remove the disk drive from the package.
Step 8. Align the drive with the bay of the hard disk drive cage; then, carefully slide the drive into the drive
bay until the drive snaps into place.
2.5-inch Hard disk drive
Figure 71. 2.5-inch hard disk drive installation
Step 9. Pull the plunger of the 2.5-inch hard disk drive cage outward and rotate the cage downward until
the cage snaps into place.
2
Figure 72. Put the 2.5-inch hard disk drive cage downward
1
1
.
Chapter 5 Removing and replacing components
147