Lenovo NeXtScale nx360 M4 Installation And Service Manual page 310

3. Run the DSA program.
4. Reseat the adapter.
5. Replace the adapter.
6. (Trained technician only) Replace microprocessor n.
7. (Trained technician only) Replace the system board. (n = microprocessor number)
• 806f0009-1301ffff : [PowerSupplyElementName] has been turned off. (Host Power)
This message is for the use case when an implementation has detected a Power Unit that has been
Disabled.
May also be shown as 806f00091301ffff or 0x806f00091301ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Power Off
SNMP Trap ID
23
CIM Information
Prefix: PLAT ID: 0106
User Response
No action; information only.
• 806f000f-220101ff : The System [ComputerSystemElementName] has detected no memory in
the system. (ABR Status)
This message is for the use case when an implementation has detected that memory was detected in
the system.
May also be shown as 806f000f220101ff or 0x806f000f220101ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Memory
296
IBM NeXtScale nx360 M4 Installation and Service Guide