Lenovo NeXtScale nx360 M4 Installation And Service Manual page 57

imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with
a zero 0 not an O).
The following commands are examples of using the userid and password default values and
not using the default values:
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> –host <imm_ip>
–user <imm_user_id> –password <imm_password>asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> –host <imm_
–user <imm_user_id> –password <imm_password>asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> –ho
–user <imm_user_id> –password <imm_password>
Examples that do use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> –host <imm_ip>asu
set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> –host <imm_ip>asu set
SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> –host <imm_ip>
• Bootable media: You can also build a bootable media using
the applications available through the ToolsCenter website at
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=TOOL-CENTER. From the IBM
ToolsCenter page, scroll down for the available tools.
Step 5. Restart the server.
.
Chapter 2 Configuration information and instructions
43