Install Unicorn Software - GE ReadyToProcess WAVE 25 Operating Instructions Manual

4.3.1

Install UNICORN software

Introduction
The full UNICORN installation includes all software component parts, including the
UNICORN database, necessary to operate UNICORN and a connected local system. The
UNICORN software installed on the client computer must correspond to the version
provided in the ReadyToProcess WAVE 25 rocker. Contact your GE representative in case
of uncertainty.
The installation includes the components described in the table below.
Software component
UNICORN software
Database server
License server
Note:
Installation procedure
Step
1
2
3
4
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
Characteristics
The UNICORN software includes the four modules; Admin-
istration, Method Editor, System Control and Evaluation.
The server software necessary to operate the database
where all UNICORN data is stored. Microsoft SQL Server®
Express Edition is used for this.
The license server software is used to authorize that the
UNICORN software installation is properly licensed.
For general technical specifications for UNICORN 7.0 computers, refer to Sec-
tion 4.1.3 Client computer specifications, on page 81.
Action
Insert the installation disk into your DVD drive.
If the installation program does not start automatically, open the DVD in
Windows Explorer and double-click on the file Setup.exe to launch the pro-
gram.
Use the Next> button to step through the installation procedure.
Tip:
You can exit the installation at any stage by clicking the Cancel button.
However, if you do this the installation will be incomplete and the software
cannot be used. You may also click the Back button in some installation steps,
to return to a previous step to change selections.
Provide input or selections as requested. See the notes below for more infor-
mation.
4 Installation
4.3 Software installation
4.3.1 Install UNICORN software
91