Other Regulations And Standards - GE ReadyToProcess WAVE 25 Operating Instructions Manual

1.3.4

Other regulations and standards

Environmental conformity
This product conforms to the following environmental requirements.
Requirement
China RoHS
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
Standard
EN ISO 12100
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
IEC/EN 61010-2-010
EN 61326-1
ICES-001/NMB-001
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
Title
Management Methods for the Restriction of the Use of Haz-
ardous Substances in Electrical and Electronic Products.
Description
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
Particular requirements for laboratory equipment for
the heating of materials
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
(Emission according to CISPR 11, Group 1, class A)
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
1.3 Regulatory information
1.3.4 Other regulations and standards
NOTICE
This equipment is not intended for
use in residential environments
and may not provide adequate
protection to radio reception in
such environments.
1 Introduction
13