Readytoprocess Cbcu - GE ReadyToProcess WAVE 25 Operating Instructions Manual

7.3

ReadyToProcess CBCU

For more detailed troubleshooting, see the ReadyToProcess WAVE 25 System Handbook.
Error symptom
Status LED flashes red.
Status LED shows a
steady red light.
CAN indicator LED
flashes.
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
Possible cause
An internal error has
occurred, but the CBCU
is still operating.
An internal error has
occurred, and the CBCU
is not operating.
An internal error has
occurred, and the CBCU
is not operating proper-
ly.
Note:
This is normal the first
seconds during power
up.
Corrective action
Check any warning message and follow the instruc-
tion. If problem persists, contact GE service person-
nel.
Check any warning message and follow the instruc-
tion. If problem persists, contact GE service person-
nel.
Contact GE service personnel.
7 Troubleshooting

7.3 ReadyToProcess CBCU

161