Start The System And Log On To Unicorn - GE ReadyToProcess WAVE 25 Operating Instructions Manual

5 Operation
5.2 Start and configure the system

5.2.1 Start the system and log on to UNICORN

5.2.1 Start the system and log on to UNICORN
Follow the instructions below to start the system and log on to UNICORN. The workstation
must have a valid e-license.
See Section 4.3.2 Configure an e-license, on page 94 for more information about e-licenses.
Step
1
2
3
4
124
Action
Switch on the client computer.
Start the UNICORN software.
Provide your User Name and Password to log on to UNICORN. Access cre-
dentials are assigned by your UNICORN administrator. According to the
properties of your user account, you may be able to select an Access Group.
Note:
If Use Windows Authentication is checked, you may log on using your Win-
dows username and password.
Press the Power switch to start the rocker.
Result: The Power button flashes green during start-up, and then lights
steadily when the rocker is operational.
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD