Table of Contents
Advertisement
3 System description
3.3 ReadyToProcess CBCU
3.3
ReadyToProcess CBCU
Introduction
The control unit, ReadyToProcess CBCU, is connected to the rocker via a UniNet-9 con-
nector. The full configuration mixes air/N
sensors, a mass flow controller, an optical pH sensor reader, and an optical DO sensor
reader. Three configurations are available:
•
•
•
For specifications of the CBCU, refer to the ReadyToProcess WAVE 25 System Handbook
or the data file for ReadyToProcess WAVE 25, available for download from
www.gelifesciences.com/wave.
Front view of ReadyToProcess
CBCU
The illustration below shows the front panel of a fully configured CBCU. The configuration
of your CBCU may vary from the configuration shown below.
52
ReadyToProcess CBCU pH: CO
ReadyToProcess CBCU DO: CO
ReadyToProcess CBCU Full: CO
1
, O
, and CO
2
2
, O
and pH.
2
2
, O
and DO.
2
2
, O
, pH and DO.
2
2
3
2
4
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
gas, and contains O
2
and CO
2
2
Hide quick links:
Advertisement
Table of Contents
