Other Regulations And Standards - GE akta pure Operating Instructions Manual

1 Introduction
1.3 Regulatory information

1.3.4 Other regulations and standards

1.3.4 Other regulations and standards
Introduction
This section describes the standards that apply to the ÄKTA pure system.
Environmental conformity
This product conforms to the following environmental requirements.
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
Standard
EN ISO 12100
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
EN 61326-1
ICES-001/NMB-001
EN 300 330-2
EN 301 489-3
12
Description
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
(Emission according to CISPR 11, Group 1, class A)
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equip-
ment in the frequency range 9 kHz to 25 MHz and induc-
tive loop systems in the frequency range 9 kHz to 30
MHz; Part 2: Harmonized EN covering the essential re-
quirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3: Spe-
cific conditions for Short-Range Devices (SRD) operating
on frequencies between 9 kHz and 246 GHz
ÄKTA pure Operating Instructions 29022997 AF