Table 43. Output Voltage Characteristics - STMicroelectronics STM32L151RE Manual

Ultra-low -power 32-bit mcu arm-based cortex-m3 with 512kb flash, 80kb sram, 16kb eerom, lcd, usb, adc, dac
Table of Contents

Advertisement

Electrical characteristics
Output driving current
The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or
source up to ±20 mA with the non-standard V
In the user application, the number of I/O pins which can drive current must be limited to
respect the absolute maximum rating specified in
The sum of the currents sourced by all the I/Os on V
consumption of the MCU sourced on V
I
VDD(
The sum of the currents sunk by all the I/Os on V
consumption of the MCU sunk on V
I
VSS(
Output voltage levels
Unless otherwise specified, the parameters given in
performed under the conditions summarized in
compliant.
Symbol
(1)(2)
V
OL
(2)(3)
V
OH
(3)(4)
V
OL
(3)(4)
V
OH
(1)(4)
V
OL
(3)(4)
V
OH
1. The I
IO
and the sum of I
2. Guaranteed by test in production.
3. The I
IO
Table 11
4. Guaranteed by characterization results.
90/134
(see
Table
11).
)
Σ
(see
Table
11).
)
Σ

Table 43. Output voltage characteristics

Parameter
Output low level voltage for an I/O pin
Output high level voltage for an I/O pin
Output low level voltage for an I/O pin
Output high level voltage for an I/O pin
Output low level voltage for an I/O pin
Output high level voltage for an I/O pin
current sunk by the device must always respect the absolute maximum rating specified in
(I/O ports and control pins) must not exceed I
IO
current sourced by the device must always respect the absolute maximum rating specified in
and the sum of I
(I/O ports and control pins) must not exceed I
IO
DocID025433 Rev 8
STM32L151xE STM32L152xE
/V
specifications given in
OL
OH
Section
6.2:
plus the maximum Run
DD,
cannot exceed the absolute maximum rating
DD,
plus the maximum Run
SS
cannot exceed the absolute maximum rating
SS
Table 43
are derived from tests
Table
13. All I/Os are CMOS and TTL
Conditions
I
= 8 mA
IO
2.7 V < V
< 3.6 V
DD
I
= 4 mA
IO
1.65 V < V
< 3.6 V
DD
I
= 20 mA
IO
2.7 V < V
< 3.6 V
DD
.
VSS
VDD
Table
43.
Min
Max
-
0.4
V
-0.4
-
DD
-
0.45
V
-0.45
-
DD
-
1.3
V
-1.3
-
DD
Table 11
.
Unit
V

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STM32L151RE and is the answer not in the manual?

Table of Contents