Yealink VC400 Administrator's Manual page 85

For more information on 802.1X authentication, refer to
802.1X feature parameters on the system are described below:
Parameter
Specifies the 802.1x authentication
mode.



802.1x Mode


Default: Disabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the user name for 802.1x
authentication.
Identity
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the password for 802.1x
authentication.
MD5 Password
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the access URL of the CA
certificate when the 802.1x
authentication mode is configured
as EAP-TLS, PEAP-MSCHAPV2 or
CA Certificates
EAP-TTLS/EAP-MSCHAPV2.
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the access URL of the
device certificate when the 802.1x
authentication mode is configured
Device Certificates
as EAP-TLS.
Note: If you change this parameter,
the system will reboot to make the
Description
Disabled
EAP-MD5
EAP-TLS
PEAP-MSCHAPv2
EAP-TTLS/EAP-MSCHAPv2
Configuring Network
Yealink 802.1X Authentication
Configuration Method
Remote Control
Web User Interface
Web User Interface
Web User Interface
Web User Interface
Web User Interface
.
69